Ag-leader Yield Monitor 2000 Operators Manual User Manual download pdf (Page 148)

Site Verification Setup

Yield Monitor 2000

Ag Leader Technology

June 1997

5-12

Logging Device

Follow these steps to set the logging device:

Step Action

1 Press the SETUP key until “LOGGING DEVICE =NONE or EXT

or ?M CARD” appears on the display.

2 Use the UP ARROW key to set this setting to ?M CARD.

Logging Interval

The logging interval is how often the monitor records instantaneous yield

and GPS data to the memory card. Follow these steps the set the interval:

Step Action

1 Press the SETUP key until “x SECOND LOGGING INTERVAL”

appears on the display.

2 Set to 1, 2, or 3 seconds with the top ARROW keys.

Note: If you are recording field boundaries with an ATV or truck, and are

driving faster than you would if you were operating a combine in the field,

set the logging interval to one second, so that a more solid boundary line is

developed during mapping. For planting and spraying (speeds comparable to

harvesting), you can set the logging interval to three seconds.

Log Without Grain

Flow

You must set the monitor to log without grain flow to allow the monitor to

record data to the memory card without requiring a grain flow signal. Follow

these steps to set the monitor:

Step Action

1 Press the SETUP key until “LOG W/O GRAIN FLOW = NO or

YES“ appears on the display.

2 Use the top UP ARROW key to select YES.

Stop Height

If you are using an implement switch with your modular tractor kit, you

must set the stop height as follows:

Step Action

1 Press the STOP HEIGHT key to display the stop height number.

2 Set the stop height to any value between 40 and 60.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 201 202

No comments

Ag-leader Yield Monitor 2000 Operators Manual User Manual Page 148