Ag-leader Yield Monitor 2000 Operators Manual User Manual download pdf (Page 94)

Memory

Yield Monitor 2000

Ag Leader Technology

June 1997

4-28

Introduction

The monitor has its own memory, apart from a memory card, for which it

stores all data (except global positioning system {GPS} data) for all the

fields and loads for an entire year. The memory card is used to save the

logged GPS and yield data for yield mapping. The monitor’s own memory

can hold up to 976 total loads and 255 total fields. The monitor has two

types of internal memory:

• Main memory

• Backup memory

Note: If you have a computer with Windows 3.1™ or Windows 95™ or

you are logging data to a memory card, you can print a summary of all the

yield data for the entire season (usually at the end of the year).

Main Memory

The main memory is the primary memory that contains all yield data for all

fields and loads. The monitor automatically adds yield data to the main

memory as you harvest. The fields and loads you see on the monitor’s

display are all in the main memory.

Backup Memory

The backup memory is secondary memory that is provided to back up yield

data in case the yield data in the main memory is erased or becomes corrupt.

Yield data, as you create new loads and add new data, does not save to the

backup memory automatically; it is saved only to the main memory. You

must manually copy the main memory to the backup memory, otherwise you

will not have a backup copy of your data if you have a system failure.

Copying Main

Memory to Backup

Memory

It is extremely important to copy your main memory to the backup

memory at least once a day. Follow these steps to copy the main memory

to the backup memory:

Step Action

1 Press the MEM key until “COPY MEMORY TO BACKUP?”

appears on the display.

2 Press the YES key.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 201 202

No comments

Ag-leader Yield Monitor 2000 Operators Manual User Manual Page 94