Ag-leader Yield Monitor 2000 Operators Manual User Manual download pdf (Page 34)

Starting, Naming Fields, Loads

Yield Monitor 2000

Ag Leader Technology

June 1997

2-30

Starting, Naming

Loads With the

Monitor

The next step is to create and name the loads within the fields. You need to

consider how you want to logically subdivide the fields into loads.

Note: It is common to designate Load 1 for the end rows and name it

“ENDROWS”. The other loads could be designated for a certain variety or

hybrid. Name these loads the hybrid or variety name (example:

“L2:P3417”). Because you may not know how many loads you want to

create until harvest, you can create and name more loads any time.

Step Action

1 Press the LOAD key to display field and load on the top line.

2 With the cursor under the load, use the RIGHT ARROW key to

move the cursor to the right one space.

3 Press the top-right UP ARROW key to change the blank space to

either a symbol, number, or letter. You can enter up to eight

characters for a load name.

Example:

F1:WEST8 L1:HYBRID

CORN 0.0 AV B/A

4 Press the LOAD key to display field and load on the top line to

create a load.

5 Press the top-right UP ARROW key to scroll to the next load. If

the next load has not already been created, the monitor displays

“START NEW LOAD?” on the top line.

6 Press the YES key to start a new load.

7 Name the new load and create and name loads for all the fields you

have created.

8 Repeat steps 1 through 7 for each field you want to create.

Settings Performed

in the Combine

All the settings up to this point could be completed with the monitor out of

the combine and plugged into a wall outlet. The stop height setting and the

distance calibration must be completed with the monitor in the combine cab.

* * *

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 201 202

No comments

Ag-leader Yield Monitor 2000 Operators Manual User Manual Page 34