Ag-leader Yield Monitor 2000 Operators Manual User Manual download pdf (Page 99)

Yield Monitor 2000

Clearing Fields/Loads From

Ag Leader Technology

Memory

June 1997

4-33

Step Action

4 “KEEP FIELD NAMES?” appears on the monitor display.

• Press the YES key to keep all the existing fields and field names.

• Press the NO key to delete all the existing fields and field names.

Recommendation: If you want to delete the names of only some of

the existing fields, it will still save you time to keep all the field

names and use a computer or the monitor to delete the field names

you do not want to keep. To delete the field names on the monitor,

set each character of the field name to a space. The space character is

between the 9 and the A as you press the ARROW keys to scroll

through the list.

If you keep the field names, the monitor leaves one load in each field,

but erases the yield data for the field and all the loads in the field. The

monitor selects the following settings for every Load 1 in every field:

• Grain type remains the same

• Moisture is set to AUTO

• Speed remains the same

Go through each Load 1 in each field and set the grain type to

the crop you will harvest in that field next season after you have

erased all the loads but kept the field names. Also, make sure the

moisture and speed settings are correct for every Load 1.

5 The monitor beeps four times again and “REALLY WANT TO

ERASE FIELD DATA?” appears on the display. Press the YES key

to erase, otherwise press any key other than the YES key to bypass

erasing.

Notes:

• If you decide that you should not have cleared the monitor, you can

restore main memory from backup if you copied the main memory to the

backup memory before you cleared the monitor.

• Clearing the monitor does not change the distance, moisture,

temperature, or C1 calibration numbers.

* * *

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 201 202

No comments

Ag-leader Yield Monitor 2000 Operators Manual User Manual Page 99