Ag-leader Yield Monitor 2000 Operators Manual User Manual download pdf (Page 112)

Using a GPS Receiver

Yield Monitor 2000

Ag Leader Technology

June 1997

4-46

GPS Status

Indicator

Press the SETUP key to ensure that the monitor is set on LOGGING

DEVICE=?M CARD. The monitor must have this setting before it will look

for a GPS signal.

You do not have to put a card in the monitor to receive a GPS signal. When

the monitor is set to log to a card, you will see two status indicators on the

right side of the top line of the display. The indicators vary. Refer to the list

below for possible indicators and what they mean:

• Two dashes on the top line of the display indicate there is no GPS or

differential.

• The dash at the right of the monitor display changes to g when the GPS

receiver obtains a two-dimensional fix (receiver is tracking three

satellites).

• The dash at the right of the monitor’s display changes to a G when the

GPS receiver obtains a three-dimensional fix, (receiver is tracking four or

more satellites).

• The dash at the left of the monitor’s display changes to a D when the

GPS receiver has differential correction.

• The right end of the top display shows DG with full GPS and differential

correction.

• The right end of the top display shows DG-> with the arrow pointing to

the memory card when you are logging data to a card and you have a full

GPS differential correction signal.

When the status of either the GPS fix or differential correction changes, the

monitor double-beeps.

* * *

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 201 202

No comments

Ag-leader Yield Monitor 2000 Operators Manual User Manual Page 112