Ag-leader Yield Monitor 2000 Operators Manual User Manual download pdf (Page 38)

Calibrating Distance

Yield Monitor 2000

Ag Leader Technology

June 1997

3-2

Preparing to

Calibrate Distance

You must do the following before you begin calibrating distance:

• Accurately measure a known distance, setting flags or making a mark at

each end

Notes:

• A distance of at least 200 feet is desired to obtain an accurate

calibration.

• For maximum accuracy, calibrate on a ground surface that is at least

somewhat similar to field conditions (you can also calibrate while

harvesting if you know or measure a precise distance in the field).

• Change to a data load (load with arrow to right of load number L1->)

with no distance.

Follow these procedures to change to a data load.:

Step Action

• Start a new load by pressing the top UP ARROW key with the

load displayed and scroll past the last load.

• Make an existing load the data load by pressing the MEM key

until “CHANGE TO THIS LOAD?” appears on the display, then

press the YES key.

2 Press the DIST key to display “x FT,” and check that 0 feet are in the

data load. If there are feet in the load, start a new load according to

step 1.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 201 202

No comments

Ag-leader Yield Monitor 2000 Operators Manual User Manual Page 38