Ag-leader Yield Monitor 2000 Operators Manual User Manual download pdf (Page 93)

Yield Monitor 2000

Grain Type

Ag Leader Technology

June 1997

4-27

Setting/ Changing

Grain Type

When you create a field, “SET GRAIN/PRESS YES” appears on the

display, and a grain type appears in the bottom-left corner of the display.

Follow these steps to set the grain type:

Step Action

1 Use the bottom-left UP and DOWN ARROW keys to scroll through

the grain types to highlight the type you want.

2 Press the YES key to set the new field to that grain type.

Although you can use only one grain type in a field, grain type is set load-by-

load. When you create new loads in a field, the monitor sets the grain type of

the created load to the grain type of the last load in that field. When you

press the YES key to set the grain type when a field is created, the monitor

actually is setting the grain type for load one in that field.

To change the grain type of an existing field, you must display every load in

that field, one at a time, then change the grain type of each load. Follow

these steps to change a grain type:

Step Action

1 Display a load, then press the GRAIN key until the grain type

appears on the display.

2 Use the bottom-left UP or DOWN ARROW keys to change the grain

type.

Note: If you display the field alone on the top line and press the GRAIN key

to display the grain type, you will not be able to change the grain type

because you must change it for each load in that field.

If you harvest loads set on the wrong grain type, you can change those loads

back to the correct grain type on the monitor, except when you are changing

either to or from CORN or SPECIAL CORN (all other grain type

combinations can be changed from one to another to provide correct weight

calculation).

* * *

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 201 202

No comments

Ag-leader Yield Monitor 2000 Operators Manual User Manual Page 93